Designed for Durability, Proven in Extremes.
Custom non-standard cable engineering (AWG 44 to 400 mm², –65°C to +1000°C+) and UL/SAE/ISO/NEMA high-temperature specialty wires built for extreme industrial, automotive, and aerospace environments.
Custom Wire & Cable Engineering Capabilities
- : AWG 44 to 750 kcmil · 0.002 mm² to 400 mm² (Solid, concentric stranded, rope-lay, ultra-fine robotics flex stranding, and flat ribbon geometry)
- : Bare Copper, Tinned Copper, Silver-Plated (SPC), Nickel-Plated (2% & 27%), Pure Nickel, Special Alloys (Thermocouple alloys (KX/JX/EX), copper-nickel, stainless steel reinforcement, and hybrid power/signal cores)
- : PTFE, FEP, PFA, ETFE, PEEK, Silicone Rubber (SiR), XLPE / XLPO, PVC, Mica / Fiberglass Wrap (Precision thin-wall fluoropolymer extrusion, multi-layer tape wrapping, and sintered high-dielectric builds)
- : –65°C to +1000°C+ Extreme-Temperature Envelope (Cryogenic fluoropolymer flexibility through 250°C TGGT, 450°C–550°C MGT, pure nickel, and 1000°C+ quartz/ceramic fiber constructions)
- : Low-Voltage Signal up to 35kV+ Operating / 100kV Dielectric Test · 50Ω / 75Ω / 100Ω / 120Ω Controlled Z₀ (High-voltage corona-resistant silicone/fluoropolymer builds and impedance-matched CAN / coaxial / differential pairs)
- : Al-Mylar Foil, Tinned / Silver / Nickel Copper Braid (≥85%–95%), Spiral Serve, SS304 / Aramid / Fiberglass Braid (Dual foil + braid EMI protection, low-noise triboelectric layers, abrasion-resistant overbraids, and rodent/crush armor)
- : Single Hook-Up Wire to 64+ Core Cables, Twisted Pairs/Triads, Coax + Power + Signal Composite Bundles (Custom pitch control, low-skew pairing, PTFE/silicone fillers, custom color stripes, number printing, and laser-markable jackets)
Wire & Cable Applications
Standards & Specifications
Insulation & Jacket Materials
Engineering Insights
- PFAS-Free High-Temperature Wire & Cable Alternatives: Navigating ECHA's November 2026 Opinions, EPA TSCA 8(a)(7), and Fluoropolymer Substitution
- J1939 Cable Impedance: Why 120Ω Is Non-Negotiable in CAN Bus & CAN FD Design
- SAE J1939/11 vs. J1939-15 & J1939-14: Shielded vs. Unshielded CAN Bus Physical-Layer Guide
- Change Order Survival: Amending a Released J1939 CAN Bus Cable Spec Mid-Program
- High-Temperature Conductor Selection (150°C to 1000°C+): Tin, Silver, 2% Nickel, 27% Nickel-Coated & Pure Nickel
- Fluoropolymer vs. Silicone Insulation Guide: PTFE, FEP, PFA, ETFE, PVDF & SiR Tradeoffs
- XLPE Cross-Linking Methods Compared: Electron-Beam Irradiation vs. Chemical Peroxide (CCV) vs. Silane (Sioplas & Monosil)
- Why FEP & PTFE Insulated Cores Cannot Use Cross-Linked Jackets: E-Beam, Peroxide, Silane, and Silicone Compatibility Guide